Work Order Tracking / (CM) / (HSE) / (Tr) - Dialogs

Actions  | Dialogs  | Hierarchy  | Work Order  | Plans  | Assignments  | Related Records  | Actuals  | Activities  | Measurements  | Axle Configuration  | Safety Plan  | Log  | Data Sheet  | Failure Reporting  | Specifications  | Service Address

Dialogs

Available Labor

Tab / Table / Section	Attribute	Remarks
	From	Date Range Starting from
	To	Date Range ending on
	Include Fully Assigned	Select this check box to include labor, even if they are fully allocated to other assignments during the specified date range.
	Location	Identifies the Work Location
	Vendor	Vendor associated with this assigned labor.
	Contract	Contract number associated with this assigned labor.
	"Refresh" button
		Table
	Labor	Identifier of the labor record. This field must be unique within an organization. When you save a labor record, this field becomes read-only.
	Name	A nick name or a friendly name that this person can be identified with.This field is automatically populated when values are entered in the First Name and/or Last Name fields.
	Craft	Identifier of this labor code's default craft. A list of all crafts associated with this labor code is displayed in the Crafts tab.
	Skill Level	The skill level of the craft for this labor code.
	Work Location	The location where this labor code works. The work location maybe used to select a labor code for work order assignments. This location's internal labor account is used to set the GL Control Account on all crafts for this labor that are not associated with a vendor. The GL Control Account, in turn, is used as the credit GL account for the labor transaction.
	Shift	The shift record associated with this person.
	Start Time	Start time of available hours
	Available Hours	AVAILABILITY
	Assigned	Indicates if labor with no availability during the date range is included in the available labor list.
	"Cancel" button

Reschedule/Unassign Assignments

Tab / Table / Section	Attribute	Remarks
	Reschedule Date	Date to which assignments of selected work orders will be rescheduled.
	Reschedule the assignments	Indicates if the assignments of the selected wo should be rescheduled. Clear the check box to unassign the labor from the assignments and change the status of the assignments to WAITASGN. Assignments in COMPLETE or WAITASGN status will not be affected.
	"OK" button
	"Cancel" button

View PM Alert Information

Tab / Table / Section	Attribute	Remarks
PMs		Table
	PM	Identifies the preventive maintenance record from which the work order was generated.
	Description	Describes the work order. To enter or view additional information, click the Long Description button.
	Asset	Identifies the asset. The Asset field is for the Maximo asset identifier, the value Maximo uses to track the asset. An asset can also have one or more aliases. Transportation (Tr) applications have an Alias field next to the Asset field. You can enter either a Maximo asset identifier or an asset alias in the Asset field. If you enter an alias, Maximo recognizes it and replaces it with the Maximo asset identifier. Maximo moves the alias to the read-only Alias field. Some applications do not have an Alias field that is paired with the Asset field. In these applications, if you enter an asset alias in the Asset field, the alias is simply replaced by the Maximo asset identifier. An alias can be associated with more than one asset. If you enter such an alias in the Asset field, Maximo displays a Select Value list of the assets that have that alias.
	Location	Identifies the work order's location. This is not necessarily the asset's location, however, if an asset is entered, its location will default here
	Has Children	Y if WO has children N if it has no children
	Parent WO	Parent of the work order shown in the Work Order field. When this field is blank, the work order in the Work Order field is a top-level work order. To assign a work order to a parent, select Assign to New Parent from the Select Action menu.
	"OK" button
	"Cancel" button

View Work Order History

Tab / Table / Section	Attribute	Remarks
Status History		Table
	Status	New Work Order Status
	Status Date	Work Order Status Change Date
	Changed By	User Signature
	Memo	Status Memo
	GL Account	GL Account value when status changed.
Ownership History		Table
	Own Date	Date and time at which the owner or owner group received possession of the work order.
	Owner	Owner of the work order
	Owner Group	Owner group of the work order.
	Owner Change By	Person who changed the work order's ownership.
	"OK" button

Manage Downtime History

Tab / Table / Section	Attribute	Remarks
	Work Order	Identifies the work order.
	Site	Identifies the site.
		Table
Details		Section
	Asset	Asset number
	Start Date	NP date time field representing the start date.
	Start Work Order	NP field for starting work order number.
	Start Code	Start Code
	Downtime	Downtime Hours
	End Date	End Date
	End Work Order	End Work Order Number
	End Code	End Code
Start Operational Type		Section
	Start Operational Type	Start Operational
		"Operational" radio button
		"Non-operational" radio button
End Operational Type		Section
	End Operational Type	End Operational
		"Operational" radio button
		"Non-operational" radio button
	"OK" button
	"Cancel" button

Change Work Order Options

Tab / Table / Section	Attribute	Remarks
	Ignore Storeroom Availability For Work Order Status	Indicates whether to ignore the availability of items in the storeroom for the work order status approval.
	Ignore Direct Issue Availability For Work Order Status	Indicates whether to ignore the availability of direct issues for the work order status approval.
	"Apply to Work Package" button
	"Cancel" button
	"Apply to Current Work Order" button

Tool Spot Checks for Work Order

Tab / Table / Section	Attribute	Remarks
Tool Spot Check for Work Order {0}		Table with "New Row" and "Delete" button. "Mark Row for Delete" icon is available for every row.
Tool Spot Check for Work Order {0} > Spot Check		Section
	Asset Number	Asset Number
	Standard Asset Number	Standard Asset Number
	Spot Check Status	Spot Check Status
	Check Type	Check Type
	Description	Description
	Item Number	Item Number
	Standard Item Number	Standard Item Number
	Checked Date	Checked Date
	Checked By	Checked By
	"OK" pushbutton

Check Tool Status

Tab / Table / Section	Attribute	Remarks
Assets		Section
	ITEMNUM	Identifies the item record. This value must be unique for all item records. Click the Detail Menu button to view items by classification or availability.
	SERIALNUM	Asset Serial Number
	"Refresh" pushbutton
	"Cancel" pushbutton
		Table
	Asset	Asset Number
	Description	Describes the asset. To enter or view additional information, click the Long Description button.
	Serial #	Asset Serial Number
	Is M&TE	Defines whether a Tool is a standard used for measuring and testing equipment.
	Status	Status of the asset.
	Calibration Due Date	The date that the next 'Cal' work type PM will be generated

Review Data Sheets

Tab / Table / Section	Attribute	Remarks
	Description	Describes the work order. To enter or view additional information, click the Long Description button.
Associated Data Sheets		Table
Associated Data Sheets > Details		Section
	Data Sheet	Identifier of the selected data sheet.
	Reviewer	The person reviewing the datasheet
	Review Date	Data when the datasheet was reviewed on the workorder
	As Found Status	The As Found status for the associated data sheet.
	As Left Status	The As Left status for the associated data sheet.
	"OK" pushbutton
	"Cancel" pushbutton

View Calibration History

Tab / Table / Section	Attribute	Remarks
	Date From	Date From
	Date To	Date To
	"Refresh" button
Asset Calibrations		Tab
Asset Calibrations > Data Sheets		Table
	Work Order Number	Work Order
	Actual Finish	Date and time the actual work was completed.
	Data Sheet	Identifier of the selected data sheet.
	Asset Number	Asset Number
	Location	Enter or select the location this data sheet is associated with. This is used for loop calibrations.
	Status	The As Found status for the associated data sheet.
	No Adjustment Made	No Adjuste Made
	Status	The As Left status for the associated data sheet.
	Required	When selected, all as found and as left data must be entered before the work order can be set to CLOSED or COMPLETE.
	Required	When selected, all as found and as left data must be entered before the work order can be set to CLOSED or COMPLETE.
Asset Calibrations > Asset Functions		Table
	Function	Asset Function Number
	Description	The description of the asset function for this data sheet.
	Plan Type	Indicates if the asset function type is ANALOG or DISCRETE. Dependent upon the asset function type being ANALOG or DISCRETE, the appropriate fields in the Asset Functions table window are either enabled or disabled for the type of asset specified.
	Asset Function Calibration Range Engineering Units	The units used to express the value of the input range. Click Select Value to select a value from the list.
	Asset Function Output Range Engineering Units	The units used to express the value of the output range. Click Select Value to select a value from the list.
	Process Engineering Units	Defines the engineering units used for reporting calibration error. Click Select Value to select a value from the list.
	No Adjustment Made Choice	The No Adjustment Made Option saves the technician time. When you create a data sheet, you can specify that Maximo use one tolerance (Tolerance 1, Tolerance 2, Tolerance 3, or Tolerance 4) for the No Adjustment Made option. If all As-Found values are within the acceptable user-specified tolerance, the technician can check the No Adjustment Made check box on the work order data sheet. When the technician selects the No Adjustment Made check box, Maximo copies the As Found values to the As Left fields on the work order data sheet and both fields become read-only.
	As Found Calibration Status	As Found Calibration Status
	As Left Calibration Status	As Left Calibration Status
	As Found Errors	When any As Found Calibration Points exceed their status, or a Function Check has failed, the points are summed and displayed in this field.
	As Left Errors	When any As Left Calibration Points exceed their status, or a Function Check has failed, the points are summed and displayed in this field.
Asset Calibrations > Calibration Points		Tab
Asset Calibrations > Calibration Points > Calibration Points		Table
	Calibration Point	The user entered reference number for the calibration requirement for each asset function.
	Input Value	The user specified input value for each analog calibration point.
	Output Value	The value of the desired output for an analog calibration point.
	As Found Input	The As Found input value for an analog instrument.
	As Found Output	The As Found output value for an analog instrument.
	As Left Input	The As Left input value for an analog instrument.
	As Left Output	The As Left output value for an analog instrument.
	Set Point Value	The value of the desired set point for a discrete calibration point.
	As Found Set Point	The As Found value at which a discrete device should actuate.
	As Left Set Point	The As Left value at which a discrete device should actuate.
	As Found Error	When selected, indicates that As Found Calibration Point has exceeded its status.
	As Found Error	When selected, indicates that As Found Calibration Point has exceeded its status.
	As Left Error	When this check box is selected, the As Left Calibration Point has exceeded its status.
	As Left Error	When this check box is selected, the As Left Calibration Point has exceeded its status.
Asset Calibrations > Function Checks		Tab
Asset Calibrations > Function Checks > Function Checks		Table
	Function	Asset Function Number
	Calibration Point	The user entered reference number for the calibration requirement for each asset function.
	Description	Point Description
	As Found Pass	When selected, indicates that the As Found Function Check passed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Found Pass	When selected, indicates that the As Found Function Check passed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Found Fail	When selected, indicates that the As Found Function Check failed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Found Fail	When selected, indicates that the As Found Function Check failed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Left Pass	When selected, indicates that the As Left Function Check passed. The As Left Pass and As Left Fail fields are mutually exclusive.
	As Left Pass	When selected, indicates that the As Left Function Check passed. The As Left Pass and As Left Fail fields are mutually exclusive.
	As Left Fail	When selected, indicates that the As Left Function Check failed. The As Left Pass and As Left Fail fields are mutually exclusive.
	As Left Fail	When selected, indicates that the As Left Function Check failed. The As Left Pass and As Left Fail fields are mutually exclusive.
Asset Calibrations > Dynamic Checks		Tab
Asset Calibrations > Dynamic Checks > Dynamic Checks		Table
	Function	Asset Function Number
	Calibration Point	The user entered reference number for the calibration requirement for each asset function.
	Description	Point Description
	As Found Input	The input value before the asset is adjusted. All As Found data must be entered before a work order can be closed.
	Units	The engineering units the As Found Dynamic Value is measured in. This field is mandatory when an As Found Value is entered.
	As Left Input	The input value after the asset is adjusted. All As Left data must be entered before a work order can be closed.
	Units	The engineering units the As Left Dynamic Value is measured in. This field is mandatory when an As Left Value is entered.
Location Calibrations		Tab
Location Calibrations > Data Sheets		Table
	Work Order Number	Work Order
	Actual Finish	Date and time the actual work was completed.
	Data Sheet	Identifier of the selected data sheet.
	Asset Number	Asset Number
	Location	Enter or select the location this data sheet is associated with. This is used for loop calibrations.
	Status	The As Found status for the associated data sheet.
	No Adjustment Made	No Adjuste Made
	Status	The As Left status for the associated data sheet.
	Required	When selected, all as found and as left data must be entered before the work order can be set to CLOSED or COMPLETE.
	Required	When selected, all as found and as left data must be entered before the work order can be set to CLOSED or COMPLETE.
Location Calibrations > Asset Functions		Table
	Function	Asset Function Number
	Description	The description of the asset function for this data sheet.
	Plan Type	Indicates if the asset function type is ANALOG or DISCRETE. Dependent upon the asset function type being ANALOG or DISCRETE, the appropriate fields in the Asset Functions table window are either enabled or disabled for the type of asset specified.
	Asset Function Calibration Range Engineering Units	The units used to express the value of the input range. Click Select Value to select a value from the list.
	Asset Function Output Range Engineering Units	The units used to express the value of the output range. Click Select Value to select a value from the list.
	Process Engineering Units	Defines the engineering units used for reporting calibration error. Click Select Value to select a value from the list.
	No Adjustment Made Choice	The No Adjustment Made Option saves the technician time. When you create a data sheet, you can specify that Maximo use one tolerance (Tolerance 1, Tolerance 2, Tolerance 3, or Tolerance 4) for the No Adjustment Made option. If all As-Found values are within the acceptable user-specified tolerance, the technician can check the No Adjustment Made check box on the work order data sheet. When the technician selects the No Adjustment Made check box, Maximo copies the As Found values to the As Left fields on the work order data sheet and both fields become read-only.
	As Found Calibration Status	As Found Calibration Status
	As Left Calibration Status	As Left Calibration Status
	As Found Errors	When any As Found Calibration Points exceed their status, or a Function Check has failed, the points are summed and displayed in this field.
	As Left Errors	When any As Left Calibration Points exceed their status, or a Function Check has failed, the points are summed and displayed in this field.
Location Calibrations > Calibration Points		Tab
Location Calibrations > Calibration Points > Calibration Points		Table
	Calibration Point	The user entered reference number for the calibration requirement for each asset function.
	Input Value	The user specified input value for each analog calibration point.
	Output Value	The value of the desired output for an analog calibration point.
	As Found Input	The As Found input value for an analog instrument.
	As Found Output	The As Found output value for an analog instrument.
	As Left Input	The As Left input value for an analog instrument.
	As Left Output	The As Left output value for an analog instrument.
	Set Point Value	The value of the desired set point for a discrete calibration point.
	As Found Set Point	The As Found value at which a discrete device should actuate.
	As Left Set Point	The As Left value at which a discrete device should actuate.
	As Found Error	When selected, indicates that As Found Calibration Point has exceeded its status.
	As Found Error	When selected, indicates that As Found Calibration Point has exceeded its status.
	As Left Error	When this check box is selected, the As Left Calibration Point has exceeded its status.
	As Left Error	When this check box is selected, the As Left Calibration Point has exceeded its status.
Location Calibrations > Function Checks		Tab
Location Calibrations > Function Checks > Function Checks		Table
	Function	Asset Function Number
	Calibration Point	The user entered reference number for the calibration requirement for each asset function.
	Description	Point Description
	As Found Pass	When selected, indicates that the As Found Function Check passed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Found Pass	When selected, indicates that the As Found Function Check passed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Found Fail	When selected, indicates that the As Found Function Check failed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Found Fail	When selected, indicates that the As Found Function Check failed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Left Pass	When selected, indicates that the As Left Function Check passed. The As Left Pass and As Left Fail fields are mutually exclusive.
	As Left Pass	When selected, indicates that the As Left Function Check passed. The As Left Pass and As Left Fail fields are mutually exclusive.
	As Left Fail	When selected, indicates that the As Left Function Check failed. The As Left Pass and As Left Fail fields are mutually exclusive.
	As Left Fail	When selected, indicates that the As Left Function Check failed. The As Left Pass and As Left Fail fields are mutually exclusive.
Location Calibrations > Dynamic Checks		Tab
Location Calibrations > Dynamic Checks > Dynamic Checks		Table
	Function	Asset Function Number
	Calibration Point	The user entered reference number for the calibration requirement for each asset function.
	Description	Point Description
	As Found Input	The input value before the asset is adjusted. All As Found data must be entered before a work order can be closed.
	Units	The engineering units the As Found Dynamic Value is measured in. This field is mandatory when an As Found Value is entered.
	As Left Input	The input value after the asset is adjusted. All As Left data must be entered before a work order can be closed.
	Units	The engineering units the As Left Dynamic Value is measured in. This field is mandatory when an As Left Value is entered.
Loop Calibrations		Tab
Loop Calibrations > Data Sheets		Table
	Work Order Number	Work Order
	Actual Finish	Date and time the actual work was completed.
	Data Sheet	Identifier of the selected data sheet.
	Asset Number	Asset Number
	Location	Enter or select the location this data sheet is associated with. This is used for loop calibrations.
	Status	The As Found status for the associated data sheet.
	No Adjustment Made	No Adjuste Made
	Status	The As Left status for the associated data sheet.
	Required	When selected, all as found and as left data must be entered before the work order can be set to CLOSED or COMPLETE.
	Required	When selected, all as found and as left data must be entered before the work order can be set to CLOSED or COMPLETE.
Loop Calibrations > Asset Functions		Table
	Function	Asset Function Number
	Description	The description of the asset function for this data sheet.
	Plan Type	Indicates if the asset function type is ANALOG or DISCRETE. Dependent upon the asset function type being ANALOG or DISCRETE, the appropriate fields in the Asset Functions table window are either enabled or disabled for the type of asset specified.
	Asset Function Calibration Range Engineering Units	The units used to express the value of the input range. Click Select Value to select a value from the list.
	Asset Function Output Range Engineering Units	The units used to express the value of the output range. Click Select Value to select a value from the list.
	Process Engineering Units	Defines the engineering units used for reporting calibration error. Click Select Value to select a value from the list.
	No Adjustment Made Choice	The No Adjustment Made Option saves the technician time. When you create a data sheet, you can specify that Maximo use one tolerance (Tolerance 1, Tolerance 2, Tolerance 3, or Tolerance 4) for the No Adjustment Made option. If all As-Found values are within the acceptable user-specified tolerance, the technician can check the No Adjustment Made check box on the work order data sheet. When the technician selects the No Adjustment Made check box, Maximo copies the As Found values to the As Left fields on the work order data sheet and both fields become read-only.
	As Found Calibration Status	As Found Calibration Status
	As Left Calibration Status	As Left Calibration Status
	As Found Errors	When any As Found Calibration Points exceed their status, or a Function Check has failed, the points are summed and displayed in this field.
	As Left Errors	When any As Left Calibration Points exceed their status, or a Function Check has failed, the points are summed and displayed in this field.
Loop Calibrations > Calibration Points		Tab
Loop Calibrations > Calibration Points > Calibration Points		Table
	Calibration Point	The user entered reference number for the calibration requirement for each asset function.
	Input Value	The user specified input value for each analog calibration point.
	Output Value	The value of the desired output for an analog calibration point.
	As Found Input	The As Found input value for an analog instrument.
	As Found Output	The As Found output value for an analog instrument.
	As Left Input	The As Left input value for an analog instrument.
	As Left Output	The As Left output value for an analog instrument.
	Set Point Value	The value of the desired set point for a discrete calibration point.
	As Found Set Point	The As Found value at which a discrete device should actuate.
	As Left Set Point	The As Left value at which a discrete device should actuate.
	As Found Error	When selected, indicates that As Found Calibration Point has exceeded its status.
	As Found Error	When selected, indicates that As Found Calibration Point has exceeded its status.
	As Left Error	When this check box is selected, the As Left Calibration Point has exceeded its status.
	As Left Error	When this check box is selected, the As Left Calibration Point has exceeded its status.
Loop Calibrations > Function Checks		Tab
Loop Calibrations > Function Checks > Function Checks		Table
	Function	Asset Function Number
	Calibration Point	The user entered reference number for the calibration requirement for each asset function.
	Description	Point Description
	As Found Pass	When selected, indicates that the As Found Function Check passed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Found Pass	When selected, indicates that the As Found Function Check passed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Found Fail	When selected, indicates that the As Found Function Check failed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Found Fail	When selected, indicates that the As Found Function Check failed. The As Found Pass and As Found Fail fields are mutually exclusive.
	As Left Pass	When selected, indicates that the As Left Function Check passed. The As Left Pass and As Left Fail fields are mutually exclusive.
	As Left Pass	When selected, indicates that the As Left Function Check passed. The As Left Pass and As Left Fail fields are mutually exclusive.
	As Left Fail	When selected, indicates that the As Left Function Check failed. The As Left Pass and As Left Fail fields are mutually exclusive.
	As Left Fail	When selected, indicates that the As Left Function Check failed. The As Left Pass and As Left Fail fields are mutually exclusive.
Loop Calibrations > Dynamic Checks		Tab
Loop Calibrations > Dynamic Checks > Dynamic Checks		Table
	Function	Asset Function Number
	Calibration Point	The user entered reference number for the calibration requirement for each asset function.
	Description	Point Description
	As Found Input	The input value before the asset is adjusted. All As Found data must be entered before a work order can be closed.
	Units	The engineering units the As Found Dynamic Value is measured in. This field is mandatory when an As Found Value is entered.
	As Left Input	The input value after the asset is adjusted. All As Left data must be entered before a work order can be closed.
	Units	The engineering units the As Left Dynamic Value is measured in. This field is mandatory when an As Left Value is entered.
	"OK" button

Create Work Order with Appointment Window

Tab / Table / Section	Attribute	Remarks
	Appointment Window	The timeframe in which an appointment can be booked.
	Appointment Date	The date of the appointment.
	Number of Appointments	The number of appointments that is required to complete the work.
	Description	Describes the work order. To enter or view additional information, click the Long Description button.
	Job Plan	Job Plan for the work.
	Start No Earlier Than	The earliest date at which work should start. Scheduled dates should be after this date.
	Location	Identifies the work order's location. This is not necessarily the asset's location, however, if an asset is entered, its location will default here
	Priority	Identifies the importance of the work order, from 0-999, where 0 is the lowest priority and 999 is the highest.
	Finish No Later Than	The date that work should be completed by. Scheduled dates should be before this date.
	Asset	Identifies the asset. The Asset field is for the Maximo asset identifier, the value Maximo uses to track the asset. An asset can also have one or more aliases. Transportation (Tr) applications have an Alias field next to the Asset field. You can enter either a Maximo asset identifier or an asset alias in the Asset field. If you enter an alias, Maximo recognizes it and replaces it with the Maximo asset identifier. Maximo moves the alias to the read-only Alias field. Some applications do not have an Alias field that is paired with the Asset field. In these applications, if you enter an asset alias in the Asset field, the alias is simply replaced by the Maximo asset identifier. An alias can be associated with more than one asset. If you enter such an alias in the Asset field, Maximo displays a Select Value list of the assets that have that alias.
	Duration	Estimated remaining number of hours needed to complete the work.
	Target Start	Date and time the work is scheduled to begin.
	Fixed Appointment	Indicates whether users can set a fixed time for the appointment in the Graphical Appointment Book application.
	Target Finish	Date and time the work is scheduled to be completed.
	"OK" pushbutton
	"Cancel" pushbutton

Dynamic Job Plan Simulation

Tab / Table / Section	Attribute	Remarks
	Work Unit	Work Unit
	Units of work	Units of work
	Duration	Duration
Multi assets / locations / CI		Table with "New Row" button. "Delete Row" icon is available in every row.
	Asset	An asset that is associated with the work order.
	Location	A location that is associated with the work order.
	Configuration Item	A configuration item that is associated with the work order.
	Start Measure	Absolute distance taken from the start of the linear asset to where this linear work segment begins. This can be manually entered or calculated by entering a start reference point and start offset.
	Unit of Start Measure	Start Measure Units
	End Measure	Absolute distance taken from the start of the linear asset to where this linear work segment ends. This can be manually entered or calculated by entering an end reference point and end offset.
	Unit of End Measure	End Measure Units
	Total Work Units	Total Work Units, for all assets
Tasks		Table
	Sequence	Task Sequence
	Task	Job Plan Task Number
	Description	Description of Task in Job Plan
	Duration	Estimated Duration for the task in hours
	Calculation	Calculation method; It could be STATIC, PROPORTIONAL, LEVEL or ATTRIBUTE
	Calculated Duration	Calculated Duration
Labors		Tab
Labors > Planned Labors		Table
	Task	Job Plan Task Number
	Craft	Craft
	Skill Level	Skill Level
	Labor	Identification Number For Craft
	Quantity	Quantity
	Hours	Labor Hours Required For A Job Plan Operation
	Calculated Quantity	Calculated Labor quantity
	Calculated Labor Hours	Calculated Labor Hours
	Type	Calculation type : used to specify if the calculation update the duration or quantity value
	Calculation	Calculation method; It could be STATIC, PROPORTIONAL, LEVEL or ATTRIBUTE
Materials		Tab
Materials > Planned Materials		Table
	Task	Job Plan Task Number
	Item	Item Number Referring To Inventory Table
	Description	Names or describes the inventory item. For additional information, click the Long Description button.
	Storeroom	Primary Or Alternate Location From Inventory
	Item Quantity	Item Quantity Required For A Job Plan Operation
	Vendor	Suggested vendor to order non-stocked item from.
	Calculated Quantity	Calculated Quantity
	Calculation	Calculation method; It could be STATIC, PROPORTIONAL, LEVEL or ATTRIBUTE
Services		Tab
Services > Planned Services		Table
	Task	Job Plan Task Number
	Service Item	Item Number Referring To Inventory Table
	Description	Names or describes the inventory item. For additional information, click the Long Description button.
	Location	Primary Or Alternate Location From Inventory
	Quantity	Item Quantity Required For A Job Plan Operation
	Vendor	Suggested vendor to order non-stocked item from.
	Calculated Quantity	Calculated Quantity
	Calculation	Calculation method; It could be STATIC, PROPORTIONAL, LEVEL or ATTRIBUTE
Tools		Tab
Tools > Planned Tools		Table
	Task	Job Plan Task Number
	Tool	Item Number Referring To Inventory Table
	Description	Names or describes the inventory item. For additional information, click the Long Description button.
	Storeroom	Primary Or Alternate Location From Inventory
	Tool Quantity	Item Quantity Required For A Job Plan Operation
	Tool Hours	Number Of Hours For Which A Tool Is Used
	Vendor	Suggested vendor to order non-stocked item from.
	Calculated Quantity	Calculated Quantity
	Calculated Hours	Calculated Hours
	Type	Calculation type : used to specify if the calculation update the duration or quantity value
	Calculation	Calculation method; It could be STATIC, PROPORTIONAL, LEVEL or ATTRIBUTE
	"Simulate" button
	"Commit modifications" button
	"Close" button

Work Order Tracking Help